ADJUSTING THE THROTTLE LEVER FREE PLAY/
b
2
d
4
c
6
5
ADJUSTING THE SPEED LIMITER
a
1
3
3-13
2. Adjust:
• throttle lever free play
First step:
a. Slide back the rubber cover
b. Loosen the locknut
side.
c. Turn the adjusting nut
until the correct free play is obtained.
Direction
Free play is increased.
Direction
Free play is decreased.
d. Tighten the locknut.
e. Slide the rubber cover to its original posi-
tion.
NOTE:
NOTE:
If the free play cannot be adjusted here, adjust
it at the throttle lever side of the cable.
Second step:
f. Slide back the rubber cover
g. Loosen the locknut
h. Turn the adjusting bolt
until the correct free play is obtained.
Direction
Free play is increased.
Direction
Free play is decreased.
i. Tighten the locknut.
j. Slide the rubber cover to its original posi-
tion.
WARNING
After adjusting the free play, turn the han-
dlebar to the right and left to make sure
that the engine idling speed does not
increase.
EBS00053
ADJUSTING THE SPEED LIMITER
The speed limiter keeps the carburetor throttle
from becoming fully-opened even when the
throttle lever is applied to the maximum posi-
tion. Screwing in the adjusting screw stops the
engine speed from increasing.
CHK
ADJ
.
on the carburetor
in direction
or
.
.
in direction
or