Tie-Rods And Steering Knuckles - Yamaha YFM250RX 2008 Service Manual

EBS00460

TIE-RODS AND STEERING KNUCKLES

31 Nm (3.1 m•kg, 23 ft•lb)
25 Nm (2.5 m•kg, 18 ft•lb)
48 Nm (4.8 m•kg, 35 ft•lb)
Order
Removing the tie-rods and steering
knuckles
Front wheel/brake disc
Front brake caliper
1 Brake disc guard (inner)
2 Tie-rod
3 Front bumper
4 Lower front arm
5 Upper front arm
6 Steering knuckle
45 Nm (4.5 m•kg, 33 ft•lb)
Job/Part
6-49
STEERING SYSTEM
45 Nm (4.5 m•kg, 33 ft•lb)
25 Nm (2.5 m•kg, 18 ft•lb)
25 Nm (2.5 m•kg, 18 ft•lb)
Q'ty Remarks
Remove the parts in the order listed.
The following procedure applies to both of
the tie-rods and steering knuckles.
Refer to "FRONT AND REAR WHEELS".
Refer to "FRONT AND REAR BRAKES".
1
1 Refer to "INSTALLING THE TIE-RODS".
1
1
1
1 Refer to "REMOVING THE STEERING
KNUCKLES".
For installation, reverse the removal
procedure.
CHAS