Removing The Rear Axle - Yamaha YFM250RX 2008 Service Manual

REAR AXLE AND REAR AXLE HUB
EBS00393

REMOVING THE REAR AXLE

1. Place the machine on a level surface.
2. Loosen:
3. Remove:
NOTE: NOTE:
• Apply the brake pedal so that the rear axle
does not turn, when loosening the nut.
• Use the PTT wrench 46 or axle nut wrench
(46 mm)
4. Elevate the rear wheels by placing the suit-
5. Remove:
6. Remove:
• Never directly tap the axle end with a ham-
mer, since this will result in damage to the
axle thread and spline.
• Attach a suitable socket
end and tap it with a soft hammer, then
pull out the rear axle to the right.
6-10
• bolts
• nut
.
PTT wrench 46
90890-06588
Axle nut wrench (46 mm)
YM-37134
able stand under the frame.
• rear wheels
• wheel hubs
• nuts
• washers
• rear axle
CAUTION:
CHAS
on the axle