Removing The Parking Brake Cable; Disassembling The Front And Rear Brake Calipers - Yamaha YFM250RX 2008 Service Manual

FRONT AND REAR BRAKES

REMOVING THE PARKING BRAKE CABLE

1. Loosen:
• nut
• adjusting bolt
2. Disconnect:
• parking brake cable
(from parking brake lever)
3. Disconnect:
• parking brake cable
(from rear brake)
EBS00427
DISASSEMBLING THE FRONT AND REAR
BRAKE CALIPERS
1. Remove:
• brake caliper piston
• caliper dust seal
• caliper piston seal
Front
Rear
a. Blow compressed air into the hose joint
opening to force out the caliper piston from
the brake caliper body.
WARNING
• Never try to pry out the caliper piston.
• Cover the caliper piston with a rag. Be
careful not to get injured when the piston
is expelled from the caliper cylinder.
b. Remove the caliper piston seal.
6-34
CHAS