Assembling The Front Brake Master Cylinder; Assembling The Rear Brake Master Cylinder - Yamaha YFM250RX 2008 Service Manual

FRONT AND REAR BRAKES
EBS00415
ASSEMBLING THE FRONT BRAKE
MASTER CYLINDER
WARNING
• All internal brake components should be
cleaned and lubricated with new brake
fluid only before installation.
Recommended brake fluid
• Whenever a master cylinder is disassem-
bled, replace the piston seals and dust
seals.
EBS00416
ASSEMBLING THE REAR BRAKE MASTER
CYLINDER
WARNING
• All internal brake components should be
cleaned and lubricated with new brake
fluid only before installation.
Recommended brake fluid
• Whenever a master cylinder is disassem-
bled, replace the piston seals and dust
seals.
1. Install:
• brake master cylinder kit
• nut
• joint
NOTE: NOTE:
Turn the adjusting bolt
is within the specified limits when install the
joint .
Clearance
6-25
CHAS
DOT 4
DOT 4
until the clearance
2.2 ~ 3.2 mm (0.09 ~ 0.13 in)