Installing The Handlebar; Installing The Handlebar Grips - Yamaha YFZ450S 2003 Service Manual

STEERING SYSTEM
EBS00449

INSTALLING THE HANDLEBAR

1. Install:
• handlebar
• handlebar holders
NOTE:
_
• Install the handlebar within 3.3° from the hor-
izontal line shown in the illustration.
• The upper handlebar holder should be
installed with the punched mark 1 forward
2.
CAUTION:
_
First tighten the bolt 3 on the front side of
the handlebar holder, and then tighten the
bolt 4 on the rear side.
EBS00450

INSTALLING THE HANDLEBAR GRIPS

1. Install:
• handlebar grips 1
NOTE:
_
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface a
with a lacquer thinner.
• Install the handlebar grips to the handlebar
so that the line b between the two arrow
marks faces straight upward.
7 - 44
CHAS
23 Nm (2.3 m · kg, 17 ft · lb)