Bearings And Oil Seals; Circlips - Yamaha YFM250RX 2008 Service Manual

IMPORTANT INFORMATION
EBS00017

BEARINGS AND OIL SEALS

Install bearings and oil seals so that the manu-
facturer's marks or numbers are visible. When
installing oil seals, lubricate the oil seal lips
with a light coat of lithium-soap-based grease.
Oil bearings liberally when installing, if appro-
priate.
Oil seal
CAUTION:
Do not spin the bearing with compressed
air because this will damage the bearing
surfaces.
Bearing
EBS00018

CIRCLIPS

Before reassembly, check all circlips carefully
and replace damaged or distorted circlips.
Always replace piston pin clips after one use.
When installing a circlip
sharp-edged corner
the thrust
Shaft
1-3
GEN
INFO
, make sure the
is positioned opposite
that the circlip receives.