Special Tools - Yamaha YFM250RX 2008 Service Manual

EBS00021

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools; this will help prevent damage caused by the use of inappropriate
tools or improvised techniques. Special tools may differ by shape and part number from country to
country. In such a case, two types are provided.
When placing an order, refer to the list provided below to avoid any mistakes.
For US and CAN
P/N. YM-, YU-, YS-, YK-, ACC-
Except for US and CAN
P/N. 90890
Tool No.
Slide hummer bolt
Slide hummer bolt 6 mm
90890-01083
YU-01083-1
This tool is used to remove the rocker arm
shaft.
Weight
90890-01084
YU-01083-3
This tool is used to remove the rocker arm
shaft.
Crankcase separating tool
Crankcase separator
90890-01135
YU-01135-B
This tool is used to separate the crankcase.
Ring nut wrench
Spanner wrench
90890-01268
YU-01268
This tool is used to adjusting the front shock
absorbers.
Crankshaft installer pot
Installing pot
90890-01274
YU-90058
These tools are used to install the crankshaft.
Crankshaft installer bolt
Bolt
90890-01275
YU-90060
This tool is used to install the crankshaft.
Tool name/Function
1-5
SPECIAL TOOLS
Illustration
GEN
INFO
YU-01083-3
YU-90058/YU-90059