Yamaha YFM250RX 2008 Service Manual page 61

Route the starter relay lead under the starter
motor lead.
Clamp the taillight lead.
Do not clamp.
When clamping the wire harness, make sure that
the insulator lock is behind the clamp.
After connecting the battery negative lead, push
the sag in the box.
J
CABLE ROUTING
After connecting the taillight lead and each electric
part, the length between the air filter and AC mag-
neto coupler should be 185 mm (7.28 in) on
straight line.
There is no particular order in placing each lead.
Insert each relay all the way into the rib on the air
filter side.
Insert the starter relay all the way into the rib on
the air filter side.
B
A
J
A-A
2-38
SPEC
A
B