FRONT AND REAR BRAKES
EBS00434
INSTALLING THE FRONT BRAKE
CALIPERS
The following procedure applies to both of the
front brake calipers.
1. Install:
• brake caliper assembly
• brake caliper mounting bolts
Brake caliper mounting bolt
• brake hose
• copper washers
• union bolt
Union bolt
CAUTION:
When installing the brake hose on the
brake caliper, make sure that the brake pipe
touches the projection
caliper.
WARNING
Proper brake hose routing is essential to
insure safe machine operation. Refer to
"CABLE ROUTING" in chapter 2.
2. Fill:
• brake reservoir
Recommended brake fluid
CAUTION:
Brake fluid may damage painted surfaces
or plastic parts. Always clean up spilled
brake fluid immediately.
6-38
CHAS
28 Nm (2.8 m•kg, 21 ft•lb)
27 Nm (2.7 m•kg, 20 ft•lb)
on the brake
DOT 4