FRONT AND REAR BRAKES
EBS00419
INSTALLING THE REAR BRAKE MASTER
CYLINDER
1. Install:
• copper washers
• brake hose
• union bolt
Union bolt
CAUTION:
When installing the brake hose onto the
brake master cylinder, make sure the brake
pipe
shown.
WARNING
Proper brake hose routing is essential to
insure safe machine operation. Refer to
"CABLE ROUTING" in chapter 2.
2. Install:
• brake fluid reservoir hose
NOTE:
NOTE:
Install the brake fluid reservoir hose with the
white paint mark
3. Fill:
• brake fluid reservoir
Recommended brake fluid
CAUTION:
Brake fluid may damage painted surfaces
or plastic parts. Always clean up spilled
brake fluid immediately.
6-28
CHAS
31 Nm (3.1 m•kg, 23 ft•lb)
touches the projection
facing up as shown.
DOT 4
as