Replacing A Headlight Bulb - Yamaha YFM250RX 2008 Service Manual

Raptor 250
Table of Contents

Advertisement

REPLACING A HEADLIGHT BULB

EBS00124
REPLACING A HEADLIGHT BULB
1. Remove:
• headlight
Refer to "SEAT, FENDERS AND FUEL
TANK".
2. Disconnect:
• headlight lead coupler
3. Remove:
• headlight bulb holder cover
4. Remove:
• bulb holder
• bulb
NOTE:
NOTE:
Push the headlight bulb holder inward, turn it
counterclockwise and remove the defective
bulb.
Keep flammable products and your hands
away from the bulb while it is on. since it
will be hot. Do not touch the bulb until it
cools down.
5. Install:
• bulb
Secure the new bulb with the headlight unit.
CAUTION:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
3-54
WARNING
CHK
ADJ

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 raptor 250

Table of Contents