Bleeding The Hydraulic Brake System - Yamaha YFM250RX 2008 Service Manual

CHECKING THE BRAKE HOSES/

BLEEDING THE HYDRAULIC BRAKE SYSTEM

2. Check:
• front brake hoses
• front brake pipe
• rear brake hose
Cracks/wear/damage → Replace.
3. Check:
• brake hose clamps
Loosen → Tighten.
4. Hold the machine in an upright position and
apply the front or rear brake.
5. Check:
• brake hoses
Apply the brake lever or brake pedal several
times.
Fluid leakage → Replace the hoses or pipe.
Refer to "FRONT AND REAR BRAKES" in
chapter 6.
6. Install:
• front fender
• seat
Refer to "SEAT, FENDERS AND FUEL
TANK".
EBS00094
BLEEDING THE HYDRAULIC BRAKE
SYSTEM
WARNING
Bleed the hydraulic brake system when-
ever:
• the system is disassembled.
• a brake hose is loosened, disconnected or
replaced.
• the brake fluid level is very low.
• brake operation is faulty.
3-32
CHK
ADJ