Checking The Engine Oil Level - Yamaha YFM250RX 2008 Service Manual

MEASURING THE COMPRESSION PRESSURE/
1
b
a

CHECKING THE ENGINE OIL LEVEL

7. Install:
8. Connect:
EBS01101
CHECKING THE ENGINE OIL LEVEL
1. Place the machine on a level surface.
2. Start the engine, warm it up several min-
3. Check:
NOTE: NOTE:
• Wait a few minutes until the oil settles before
1
• Do not screw the dipstick
• Do not add any chemical additives.
• Do not allow foreign material to enter the
3-19
• Spark plug
Spark plug
18 Nm (1.8 m•kg, 13 ft•lb)
• Spark plug cap
utes, and then turn it off.
• engine oil level
Oil level should be between the minimum
level mark and the maximum level mark
.
Low oil level → Add oil to the proper level.
checking the oil level.
ing the oil level.
Recommended engine oil type
YAMALUBE 4, SAE 5W-30 or
SAE 10W-30 or SAE 20W-40
Recommended engine oil grade
API service SG type or higher
JASO standard MA
CAUTION:
Engine oil also lubricates the clutch and
additives could cause clutch slippage.
crankcase.
CHK
ADJ
in when check-