Description Of Alarms With Yokogawa Pt-500A - Furuno FEA-2107 Operator's Manual

29.6

Description of Alarms with Yokogawa PT-500A

29.6.1 Alarms
• The ECDIS control unit ALARM ACK lamp goes on.
• Type of alarm is displayed on the display ECDIS display as number and text.
• Alarm is acknowledged by pushing the ECDIS control unit's ALARM ACK button.
• List of typical alarms:
2451
2452
2455
2456
2458
2460
2461
2468
2469
2470
2471
2475
2476
2485
2497
2506
2511
2512
2514
2515
2516
29.6.2 Errors
Errors should not happen during normal operation. They are related to internal problems.
Integrated operation related alarms
The ECDIS control unit's ALARM ACK lamp goes on, type of alarm is displayed on the ECDIS display as number,
and text alarm is acknowledged by pushing the ECDIS control unit's ALARM ACK button.
List of typical alarms:
2480
2488
Route: WP approach alarm
Route: Turning disabled
Route: Off course
Route: WP approach error
Route: Last WP approach
Pilot: ROT will be exceed
Route: ROT will be exceed
Disabled - out of course
Autopilot: Off course
Disabled: Needs filter ON
AP mode Conflict - Use AUTO
Route: Needs filter ON
Route: Needs log sensor
Route: WP prewarning
Route: Stop - Sensor Fail
Route: Use AUTO control
Route: Auto resume disable
Use NFU rudder control
Route: NAVI complete turn
Conflict - NAVI complete turn
Autopilot: Drift limit
Auto pilot receive error
Integrated steering lost
29. Steering With Yokogawa PT-500A
29-11