Flush Mounting, Fixed At Rear, With Hood - Furuno MU-190V Operator's Manual

1.3

Flush Mounting, Fixed at Rear, with Hood

The flush mount, fixed at rear method allows you to attach a hood assembly OP26-10 (option) to
the monitor.
Name
Mounting Bracket
Hood Fixing Plate 19
Hood Packing
Knob M4
Flat Head Screw
Flush Mounting Template
1. Use the flush mounting template (supplied) to make a cutout in the mounting location.
2. Fix the hood fixing plates 19 to the right
and left of the monitor unit with the flat
head screws (6 pcs.).
3. Attach the hood packings to the top and
bottom brims of the monitor unit from the
rear side.
4. Follow steps 3 to 9 in section 1.2 to fix the monitor unit to the mounting location.
5. Loosely fix the knobs (4 pcs.) to the hood fixing plate from inside the plate.
Hood assembly OP26-10 (Code: 001-115-780)
Type
OP26-10-1
26-005-3302
26-007-3303
03-163-2303
M3x8
C32-01010
Code No.
001-115-810-00
100-351-611-10
100-360-650-10
100-343-602-10
000-172-167-10
000-174-550-10
Hood
packing
4
1. MOUNTING, WIRING
Qty.
1
2
2
4
6
1
Hood Fixing Plate 19
Flat Head Screw