Ais Safety Message; Introduction - Furuno FEA-2107 Operator's Manual

21. AIS Target Functions
21.6

AIS Safety Message

21.6.1

Introduction

You may send and receive messages via the VHF link, to a specified destination (MMSI) or all AIS-equipped ships
in the area. Messages can be sent to warn of safety of navigation, for example, an iceberg sighted. Routine messages
are also permitted. Short safety related messages are only an additional means to broadcast safety information. They
do not remove the requirements of the GMDSS.
To open the Safety message dialog box, which is where all phases of AIS safety messages are initiated, do the
following:
The Safety Message dialog box contains the following items:
Filter: Select category of messages to show in the Safety Message menu.
Name: Each message has an individual name based on time of creation or time of receiving of message.
Status: Display status of selected safety message.
Send: Display date and time when message is sent.
Org: Original message name is displayed here if selected safety message is reply for received message.
Vessel: AIS target related information is displayed in this field.
Address: Select how to send a safety message.
Msg Type: Select message format.
Channel: Specify channel for transmitting.
21-10
1. Display Menu/Info/Chart Menu in the mouse functions area and then push
the left mouse button to open the Main menu.
2. Choose Safety Message from the menu and then push the thumbwheel.