Alarms Page; Using The Check Page - Furuno FEA-2107 Operator's Manual

13. Route Planning
13.4.2

Alarms page

The Alarms page lets you define conditions along a route for which you want to be alerted, by visual or audible
indication. (You cannot get both visual and audible indications for a condition.) You can choose safety contour and
chart alarms used to check the safety of the route. This allows you to check safety with conditions different from
those chosen for system use. This is useful when making a route for different loading or sailing conditions.
Enable changes:
Ignore during monitoring
Indication during monitoring
Alarm during monitoring
Safety contour
Copy from used settings
13.4.3

Using the check page

The Check page allows you to make safe water calculation for your route. You also store the names of the user chart
and pilot data to use during route monitoring together with planned route on this page. This storage happens when
you activate the safe water calculation by pushing the Start button. The stored names are the names of the planned
user chart and planned pilot data.
Note 1: In order to display charts with correct updated situation, always use current date during your voyage. If your
voyage lasts more than one week, set current date at least once per week during your voyage.
Note 2: In order to display charts with correct updated situation during route planning, always use planned date of
each waypoint to check your plan.
13-6
Check here in order to enable editing.
Note: A route may only be modified when using the north-up or course-up mode.
Chart objects in this list box are not used for chart alarm calculation.
Chart objects in this list box are used for chart alarm calculation. Only the visual
alarm is released.
Chart objects in this list box are used for chart alarm calculation. Both visual and
audible alarms of chosen chart objects are generated by the system.
Deep contour chosen for chart alarm calculation
Copy system settings to here.