Furuno FEA-2107 Operator's Manual page 328

18. Common Reference System
You can set access server display options ON if you want to monitor access server windows to know harmonization
status, whenever harmonization is completed by the system.
If the system recognises that any data
mentioned above has been changed in one
workstation, the access server indicates the
need for pending harmonisation, using the
window shown right.
When the access server recognises that the
editing, loading, updating, etc. session has
been completed in one workstation, the access
server starts harmonising databases in order to
get databases identical on all workstations.
The message "Access Server is currently
harmonizing" appears to alert you to this
action. If you click the Show Details...
button, the "Progress of harmonization"
window appears to give detailed information
about harmonization progress. This window
can be closed by clicking the "Access server
is currently harmonizing" window.
Note: The Stop button in the Progress of
harmonization window is intended to stop the
harmonization in case of system malfunction.
When route, user chart or pilot data is chosen for the planning mode, the access server locks it and rejects further
selection of it in the other workstation until "Enable changes" selection is removed or the Plan Route dialog box is
closed.
Harmonising starts when "Enable changes" selection is removed or corresponding window(s) are closed. After
harmonisation has been done, the route, user chart or pilot data can be chosen in another workstation for the
planning mode.
18-4
To set access server display ON/OFF, do the following:
1. Spin the thumbwheel to display Menu/Info/Chart Menu in the
mouse functions area and then push the left mouse button.
2. Choose Initial Settings and then push the thumbwheel.
3. Place the cursor on the triangle in the Initial Settings dialog
box to show the menu shown left.
4. Choose Access Server and Diagnostic from the menu and then
Access Server Display from the submenu.
5. When access server windows are displayed, the following
messages may appear.