Alarms - Furuno NavNet TZtouch3 Series Operator's Manual

2.10

Alarms

The various Chart Plotter alarms alert you (with audiovisual alarms) when the condi-
tions specified are met. These alarms are:
• Cross track error alarm
• Sea surface temperature alarm
• Anchor watch alarm
• Boundary alarm (see section 4.17)
When an alarm is generated, the name of the offending alarm appears in the status
bar (red background with yellow text) at the top of the screen and flashes. If [Alarm
Sound] ([Alarm] menu) is active, the unit beeps.
Status bar
Note: If [Sound Alarm Until Acknowledged] is set for [OFF], the unit continues to beep
until the cause of the alarm is removed.
How to open the [Alarm] menu
1. Open the home screen, then tap [Settings]→[Alarm].
Alarm indication (ex. anchor watch alarm)
Anchor Alarm
• Depth alarm
• Speed alarm
• Wind speed alarm
• Low fuel alarm
2. CHART PLOTTER
2-13