Modifying An Existing Route; Parameters; Changing Waypoint Position - Furuno FEA-2107 Operator's Manual

13. Route Planning
13.5

Modifying an Existing Route

North Up TM ECDIS only
13.5.1

Parameters

Main parameters for the route planning are:
•
Latitude and longitude of the waypoint
•
Channel limits to the waypoint
•
Turning radius of the waypoint
•
Maximum and minimum speed limits for a leg
13.5.2

Changing waypoint position

To change position of a waypoint you have following alternatives:
•
Enter latitude and longitude on the WP page in the Plan Route dialog box.
•
Enter distance and direction for next waypoint.
•
Drag and drop waypoint using the left mouse button.
13-8
Modifying an existing route
HDG 070.0°
SPD (CALC) 1.8 Kt
SB 1.7
(POSN) Kt
COG 045.1°
(POSN)
SOG 2.0
(POSN) Kt
Posn true