Furuno FEA-2107 Operator's Manual page 297

Choosing an area of a user chart to modify
In the Area field, Current indicates which area of a user chart is chosen for modification. To modify another area,
two methods are available:
•
Enter desired area number of user chart object in the Rec box. To modify number, place the cursor in the
Current box and use thumbwheel to change desired number.
•
Use the Info feature to find area. Place the cursor on the desired corner point of the area on the electronic chart
and then push the thumbwheel.
Changing position of corner point
The easiest way to move a corner point is to drag and drop it to a desired position. This can be done as follows:
1. Open user chart and then check Enable changes on the Plan User Chart dialog box.
2. Choose appropriate chart scale so you can see desired area of user chart on display.
3. Place the cursor on the corner point you want to move to a new position.
4. While pressing and holding down the left mouse button, roll the trackball to place the cursor on desired
position. Keep the button held down while you move the cursor and release it when the cursor is at the position
desired.
Deleting an area from a user chart
To completely delete an area from a user chart, check Enable changes on the Plan User Chart dialog box. Choose
desired area object to display from the Area field and then click the Delete button.
15. User Chart Control
15-15