Using Senc Conversion History Log - Furuno FEA-2107 Operator's Manual

8.4.5

Using SENC conversion history log

The system automatically records the results of all conversions into the conversion history log. You can view the
content of this log at any time by doing the following:
1. Spin the thumbwheel to display Menu/Info/Chart Menu in the mouse functions area and then push the right
mouse button.
2. Choose SENC Convert from the menu and then push the thumbwheel.
3. The SENC Convert window appears.
After conversion (Conversion list is empty), click the Conv. History button.
Note: You can also activate the Conv. History from the "Failed SENC conversions" window.
4. A list of converted charts appears:
You can view the status of converted charts on the list, and also source if it is available.
5. Click the X at top right corner to close the window.
Below are examples of all possible results of conversion:
Perfect chart
Successful auto. conv: ENC: GB203000.000, edt:
Perfect chart which is produced by a private chart producer (i.e., chart doesn't have ENC
status)
A private chart cannot fulfil SOLAS requirements and you must refer to a paper chart as legal primary aid of
navigation, when you navigate in the area covered by this chart.
Successful auto. conv: ENC: AS31MATT.000, edt:
Conversion errors, but the chart is partly usable
Use cell status to check details of errors. Note that the chart is still ENC.
Successful auto. conv with errors: ENCD ROME416050.000, edt:
1, upd: 0 / 1999 4 3
1, upd: 0 / 1999 4 8 NON ENC
3, upd:
8. Vector Chart Material
0 / 1998 6 12
8-21