Indication Of Gyro Source - Furuno FEA-2107 Operator's Manual

19. Navigation Sensors
19.6.1

Indication of gyro source

Information area
Possible gyro source indications, which appear at the upper right corner, are as follows:
•
(1): Heading used by the ECDIS is from Gyro 1.
•
(2): Heading used by the ECDIS is from Gyro 2.
•
(cor1): Heading used by the ECDIS is from Gyro 1 and that gyro correction has been used
•
(cor2): Heading used by the ECDIS is from Gyro 2 and that gyro correction has been used
•
(mg1): Heading used by the ECDIS is from Gyro 1 which is a magnetic compass
•
(mg2): Heading used by the ECDIS is from Gyro 2 which is a magnetic compass
°
59 31.206'N
°
024 36.731'E
WGS 84
DGPS
HDG 071.0°
( 2 )
SPD (CALC) 1.8
Kt
SB (POSN) 1.7
Kt
COG 045.1°
(POSN)
SOG 2.0
(POSN) Kt
Above is an example where "First priority Gyro selection" switch is in state Gyro 2.
19-14