Furuno FEA-2107 Operator's Manual page 37

Information in autopilot sidebar
The following information is shown in the autopilot sidebar, which shows settings and readings from an autopilot.
•
Steering mode (below "Autopilot")
•
Prog CRS: If you use program track or program
heading change steering modes, planned course is
shown.
•
Set CRS: Actual set course
•
Set Heading: Actual set heading
•
Radius: Actual set radius
•
ROT: Value for ROT
Information in conning display sidebar
The following information is shown in the conning display sidebar:
•
ROT indicator
•
Heading indicator
•
Speed indicators
•
Longitudinal speed and source of speed
•
Transversal speed
•
Rudder angle indicator
Information in docking sidebar
The following information is shown in the docking sidebar:
•
ROT indicator
•
Heading indicator
•
Speed indicators
•
Longitudinal speed and source
of speed
•
Transversal speed
•
Rudder angle indicator
•
Depth below transducer
•
On bow
•
On stern
Information in chart legend sidebar
For detailed information see the chapters on vector charts (S57) and raster charts (ARCS).
• Cond: Setting for loading condition
• Perf: Setting for steering accuracy
• Off track: Distance from center line of planned
route
Transversal
speed (frwd)
Longitudinal
speed
Transversal
speed (aft)
3. ECDIS Screen
Transversal
speed (frwd)
Longitudinal
speed
Transversal
speed (aft)
Depth
Depth (at bow)
Depth (at stern)
3-9