Flush Mounting, Fixed At Rear, With Hood - Furuno MU-152HD Operator's Manual

2. Attach the flush mounting panel (15) to the display unit from the rear with the spacers and
washer head screws (M410, 8 places, torque: 1.2 N•m). Do not confuse the top and bottom
of the panel and check that screw holes on the panel and unit match.
Narrow
3. Connect all cables at the back of the display unit. See section 1.7.
4. Set the display unit assembly prepared at the step 3 to the cutout for the mounting location.
5. Fix the display unit to the cutout with the self tapping screws (4 places).
Self tapping screw
1.4

Flush Mounting, Fixed at Rear, with Hood

You can attach a hood when flush mounting the unit from the rear, using the hood assembly
JE07002-B005 (option).
Note: When the hood is installed, the hard cover cannot be used.
Hood (15) Assembly
F-Mount Hood Gasket 15
Hood Gasket Bottom 15
Wide
Hood Assembly JE07002-B005 (Code: 001-634-630)
Name
Washer Head Screw
and spacer
Fmount panel 15 assembly
(Detach and reuse from
MU-150HD)
Type Code No.
JE07002-B006 001-080-950-00
JE07002-Y563 000-199-701-10
JE07002-Y570 000-199-702-10
10
1. MOUNTING, WIRING
Qty
1
1
1