Choosing Pilot Data To Use In Planning Mode - Furuno FEA-2107 Operator's Manual

16. Pilot Data
16.4

Choosing Pilot Data to use in Planning Mode

If the PilotData in the status bar is black (or white depending on color scheme) this means that the workstation is in
the monitoring mode for pilot data. To activate the planning mode and choose pilot data for the planning mode, do
the following:
North Up TM ECDIS only
16-6
Move cursor here and
HDG 070.0°
SPD 1.8
(CALC) Kt
use thumbwheel to
SB (POSN) 1.7 Kt
COG 045.1°
(POSN)
select desired user chart.
SOG (POSN) 2.0
Kt
Posn true