Distance And Trip Counters; Resetting Distance And Trip Counters - Furuno FEA-2107 Operator's Manual

23. Recording Functions
23.4

Distance and Trip Counters

Distance and trip counters have separate
fields for both through water and over
ground distances. This information is
available on the Record page of the
Sensors dialog box, shown right. To reset
the distance and/or trip counter, see the
paragraph which follows.
23.4.1

Resetting distance and trip counters

It is useful to reset the distance counter when you are starting a new voyage.
23-14
To reset the distance and trip counters, do the following:
1. Spin the thumbwheel to show Menu/Info/Chart Menu in the mouse
functions area and then push the left mouse button. Choose Record from the
menu and then push the thumbwheel.
2. Choose Reset from the menu and then push the thumbwheel.
3. Choose Distance Counter from the submenu and then push the thumbwheel.
4. You are asked if you are sure to reset the distance and trip counters; click
the OK button to reset those counter.
To reset only the trip counter, do the following:
1. Spin the thumbwheel to show Menu/Info/Chart Menu in the mouse
functions area and then push the left mouse button. Choose Record from the
menu and then push the thumbwheel.
2. Choose Reset from the menu and then push the thumbwheel.
3. Choose Trip Counter from the submenu and then push the thumbwheel.
4. You are asked if you are sure to reset the trip counter; click the OK button
to reset the trip counter.