19.11 Depth Sensor - Furuno FEA-2107 Operator's Manual

Electronic chart display and information system (ecdis)
Hide thumbs Also See for FEA-2107:
Table of Contents

Advertisement

19. Navigation Sensors

19.11 Depth Sensor

The depth output from a depth sensor (for example, echo sounder) is shown on the Other page in the Sensors dialog
box.
The content of the Other page in the
Sensor menu depends on sensors
connected.
Posn
In this example there are two transducers
(bow and aft) installed.
The system displays depth value as depth below the transducer. If required, you can activate an alarm, in the Echo
alarm box, based on the depth below the transducer. If the measured depth is less than the set at Echo alarm, the
system generates the alarm "1200 Depth below limit".
19-26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fea-2107-bbFea-2807

Table of Contents