16. Pilot Data
16.3
Choosing Pilot Data to use in Monitoring Mode
Pilot data which is for system use is displayed in the pilot data field on the status bar. If the text "PilotData" is red
this means that the workstation is in the planning mode for pilot data. To activate the monitoring mode and choose
pilot data for the monitoring mode, do the following:
ECDIS only
North Up TM
16-4
Place cursor here,
spin thumbwheel to
HDG
070.0°
choose pilot data
SPD
1.8
(CALC)
Kt
SB
(POSN)
1.7
Kt
and push thumbwheel.
COG
(POSN)
045.1°
SOG
(POSN)
2.0
Kt
Posn true