Furuno FEA-2107 Operator's Manual page 581

Electronic chart display and information system (ecdis)

Hide thumbs Also See for FEA-2107:

Table of Contents

Chart catalogue of C-MAP charts

You can use the chart catalogue to graphically view content of loaded C-MAP database(s) into ECDIS.

1. Open the Chart menu and select Catalogue.

2. Select "Source of Chart Catalogue" as C-MAP. Use Navigation purpose selection to view desired charts.

3. Charts for which you possess a valid license are marked in green. Charts for which you have no license or the

license has expired are shown as red border lines.

1. Source of Chart Catalogue

• CD ROM: Display charts available in a named "CD ROM".

• RENC: Display charts available from an RENC.

• SENC: Display charts stored in your hard disk in SENC format.

• C-MAP: Display charts of CM93 ed. 3 chart database stored on ECDIS.

2. View Filters

• Name: Display also cell names in graphical coverage display.

• Permit: Display only charts for which you have permit.

• RENC Cancelled Charts: Display charts which are cancelled in an RENC.

• Group: Display charts which are member of selected group.

• Navigation purpose: Display charts for chosen navigation purpose (overview, general, coastal, approach,

harbour, berthing).

3. Selected Chart

Cell: Name of the chart

Open: Opens selected chart to ECDIS display.

4. The chart limit boxes are color-coded as follows:

You can view chart on ECDIS.

You cannot view chart on ECDIS, because license is missing or license has expired for the chart

Appendix 4: C-MAP CM-93/3 Charts

Fea-2107-bb Fea-2807