Furuno FEA-2107 Operator's Manual page 512

30. Alarms
Alarm number 2067:
------------------------------------
MANUAL DRIFT VALUE CAN ONLY BE
INSERTED WHEN NO SENSORS PROVIDE
SPEED OVER GROUND DATA.
USE 'SENSORS' BUTTON TO VERIFY
AND CHOOSE SENSORS TO BE USED.
Alarm number 2071:
------------------------------------
MASTER RADAR FOR ECDIS HAS BEEN
CHANGED. VERIFY NEW SOURCE OR
TRACKED ARPA TARGETS
Alarm number 2072:
------------------------------------
TO PERFORM CHART ALIGN WITH AN ARPA
RADAR THERE MUST BE TRANSFERRED USER
CHART'S LINES IN THE ARPA RADAR.
CHECK THAT YOUR CURRENT USER CHART
HAS LINES AND THAT THEY ARE VISIBLE
ON ARPA RADAR DISPLAY
Alarm number 2100:
------------------------------------
CANNOT READ USER CHART IN MONITOR
MODE. MOVE USER CHART TO PLAN MODE
TO MAKE POSTPROCESSING AGAIN FOR
USER CHART.
Alarm number 2101:
------------------------------------
USER CHART HAS MORE THAN 60 LINES OR
20 SYMBOLS AND IT DOES NOT CONTAIN
ANY POINTS. USE 'USER CHART' MENU
TO CHOOSE A VALID USER CHART OR ADD
POINTS TO CURRENT USER CHART
30-10
MANUAL DRIFT DISABLED
SOURCE ARPA RADAR CHANGED
CHARTALIGN: NO LINE AVAIL
USERCHART: FILE READ ERR
USER CHART: NEED POINTS
/7
/1
/1
/7
/7