Loading A New Arcs Chart Into The System - Furuno FEA-2107 Operator's Manual

9.4.8

Loading a new ARCS chart into the system

You may load a new ARCS chart into the system for which you have a permit, by the following methods.
•
Load by permit. You can load all the charts which are covered in your license. The system will load them
automatically.
•
Load by active group. You can define a group of charts to be loaded into the system. It will be useful to define
groups to make it easier to maintain your chart database.
•
Load manually. You can manually load charts into the system.
Loading ARCS charts by permits
[Update Charts]
Go Back
By Permits
By Group
Manual
1. Choose Load Charts from the Chart menu and By Permits from the sub
menu.
2. Insert desired CD ROM into the CD ROM drive and then click the Load
button. The progress indicator shows the number of charts loaded and the
number of charts to be loaded.
3. Repeat step 2 until you have loaded all the CD ROMs covered in your
license. After you have loaded all CD ROMs, click the X on the ARCS
Load window to close the window.
9. Raster Chart Material
Reset
Set
9-17