Specifications; Fax Function - Sharp MX-FXX1 Service Manual

[2] SPECIFICATIONS

MXFXX1

1. FAX function

A. Transmission method
Transmission time Less than 3 sec (Super G3)
Less than 7 sec (G3 ECM)
Compression/ MH, MR, MMR, JBIG
expansion system (Fixed to ECM for MMR or JBIG.)
33.6kbps → 2.4kbps automatic fallback
Modem speed
Resolution 8 x 3.85 line/mm, 8 x 7.7 line/mm,
8.15.4 line/mm, 16 x 15.4 line/mm (Standard
memory is used for transmit/receive.)
Intercommunication G3/Super G3: Standard (V.34, V.17, V.33, V.29,
V.27ter)
Communication line General telephone line (PSTN), ISDN (When TA
is installed.) Private Branch Exchange (PBX)
ECM Yes
B. Number of Support Line
Standard 1 line
Expansion Not provided
C. Transmission Mode
RSPF/OC Yes (Switching during the reading is not feasible)
transmission switching
D. Image Quality/Image Process
Half tone reproduction Equivalent to 256 levels (Valid only when
monochrome document is scanned.)
Exposure adjustment Auto / Manual (5 steps)
FAX quality selection Standard (8 x 3.85 lines/mm (203.2 x 97.8dpi))
Fine (8 x 7.7 lines/mm (203.2 x 195.6dpi))
Super Fine (8 x 15.4 lines/mm (203.2 x 391dpi))
Ultra Fine (16 x 15.4 lines/mm (406.4 x 391dpi))
Half-tone (Combination with normal character is
invalid.)
E. Record Size
Max. record width 293mm
Record size (AB series)
A3, B4, A4, A4R, B5, B5R, A5R
(Inch series)
11 x 17, 8.5 x 13, 8.5 x 14, 8.5 x 11, 8.5 x 11R,
8.5 x 5.5R
* If the document length exceeds A3 size, it is divided and printed.
* For printing the list, A5R and 8.5 x 5.5R cannot be used.
F. Dial
Manual dialing To be entered by 10-key, # key, * key
Re-dialing The previous 8 items (max.) can be saved, and
one of them can be selected.
One-touch call is available.
One-touch dialing 999 items including the group dialing items
Group dialing 999 items including the one-touch dialing items
Program dialing Max. 48 items
Chain dialing Max. 64 digits including one-touch dialing, 10-
key dialing, and pause.
Dial search Alphabet order search, User index groups
Quick search Yes
LDAP search Yes
Sub address Yes
Password Yes
Memory box registration Yes
* LDAP: Lightweight Directory Access protocol
G. Memory for Transmit/Receive
Service Manual
Standard
Memory extended
H. Function
Transmit
function
Receive
function
MX-FXX1 SPECIFICATIONS 2 – 1
8M or 16M standard memory
8MB memory included in the package
Calling function Yes
Requires the frequency
setting for each destination.
PBX function Germany, France only
Memory transmit Yes (Definable destinations :
94 destinations)
On-hook Yes
Quick online transmit Yes
Direct transmit Yes
Manual transmit Yes
Auto re-call mode Yes
Time indication function Yes
Sequential broadcasting Yes
function
F code interface Yes
broadcasting indication Only one interface station
function can be specified.
F code interface Yes
broadcasting function
F code confidential send Yes
function
Polling Yes
Even with another company
machine
Sequential polling function Yes
Even with another company
machine
F-code polling Yes
Bulletin board Yes
F code bulletin board Yes
function
Auto reduction transmit Yes
A3 → B4, A3 → A4, B4 → A4
Rotation transmit Yes
Counterclockwise rotation of
90 degrees
Duplex transmit Yes
Document transmit from OC Yes
function
Long length original transmit Only when RSPF is used.
Transmission is enable up to
800mm.
Mixed documents function Only when RSPF is used.
Zoom transmit Yes
2 in 1 transmit Yes
Card shot transmit Only when transmitting from
OC
Thin paper scan function Available except for duplex
scan
Edge erase transmit function Yes
Only for the fixed sizes
Job build Yes
Page division transmit Yes
Cover No
Index No
Transmit message adding No
function
Auto receive Yes
Manual receive Yes
DRD call function Distinctive Ring Detection
North America: Standard,
Pattern 1 – 5
Australia/New Zealand/Hong
Kong: ON/OFF (TEL/FAX)
Memory receive Yes
Transfer function Yes
Number of registration: 1
item