Sharp MX-FXX1 Service Manual page 12

SIMULATION NO.22 11
TEST
FAX COUNTER DISPLAY
00000000
SEND IMAGES_L2
FAX OUTPUT
00000000
FAX OUTPUT_L2 SEND TIME
RECEIVED TIME
00000000
FAX SEND
ACR SEND
00000000
FAX RECEIVED
00000000
SEND IMAGES
24
24-10
Purpose : Data clear
Function (Purpose) : Used to clear the FAX counter.
Section : —
Item : Counter
Operation/Procedure
1) Select the item to be cleared with the buttons on the touch
panel.
2) Press [EXECUTE] button.
3) Press [YES] button.
The target counter is cleared.
FAX OUTPUT Print quantity counter (for line 1)
FAX OUTPUT_L2 Print quantity counter (for line 2)
FAX SEND Send counter
FAX RECEIVED FAX receive counter
SEND IMAGES FAX send quantity counter (for line 1)
SEND IMAGES_L2 FAX send quantity counter (for line 2)
SEND TIME FAX send time
RECEIVED TIME FAX receive time
ACR SEND Number of carrier prefix attached communications
SIMULATION NO.24 10
TEST
FAX COUNTER DATA CLEAR
FAX OUTPUT FAX OUTPUT_L2
SEND IMAGES
SEND IMAGES_L2
ACR SEND
YES
ARE YOU SURE?
46
46-39
Purpose : Adjustment
Function (Purpose) : Used to execute the image send sharpness
adjustment.
Section : FAX
Item : Image quality
Operation/Procedure
1) Select the set item with [↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [↑], an active display is made and
item is shifted.
If there is no item over [↑], the display grays out and the
operation is invalid.
0
CLOSE
00000000
00000000:00:00
00000000:00:00
00000000
1/1
0
CLOSE
FAX SEND FAX RECEIVED
SEND TIME RECEIVED TIME
NO
EXECUTE
1/1
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 3
If there is any item under [↓], an active display is made and
item is shifted.
If there is no item over [↓], the display grays out and the
operation is invalid.
2) Enter the set value with 10-key.
* Press [C] key to clear the entered values.
3) When [OK] button is pressed, the current entered value is
saved to EEPROM and RAM.
* When [↑], [↓] button, [COLOR], or [BLACK] key is pressed, the
current set values are saved to EEPROM and RAM.
<Set range and default value of each setup>
Item Display
A 200 x 100[DPI] 200 x 100[DPI] half tone
OFF OFF
B 200 x 200[DPI] 200 x 200[DPI] half tone
OFF OFF
C 200 x 200[DPI] ON 200 x 200[DPI] half tone
ON
D 200 x 400[DPI] 200 x 400[DPI] half tone
OFF OFF
E 200 x 400[DPI] ON 200 x 400[DPI] half tone
ON
F 400 x 400[DPI] 400 x 400[DPI] half tone
OFF OFF
G 400 x 400[DPI] ON 400 x 400[DPI] half tone
ON
H 600 x 600[DPI] 600 x 600[DPI] half tone
OFF OFF
I 600 x 600[DPI] ON 600 x 600[DPI] half tone
ON
SIMULATION NO.46-39
TEST
IMAGE SEND SHARPNESS ADJUSTMENT
A 1 200 100 DPI
A:
0
B 1
200 200 DPI
C: 1
200 200 DPI
0 2
D: 1 200 400 DPI
46-40
Purpose : Adjustment
Function (Purpose) : Used to execute the FAX exposure adjust-
ment. (Collective adjustment of all the
modes).
Section : MFP/FAX
Item : Image quality
Operation/Procedure
1) Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
2) When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [OK] button, [COLOR], or [BLACK] key is pressed, the
data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button is
pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
Display item &
Item
Detail of display
A EXPOSURELEVEL Exposure data value
(ALL) (Collective)
Set Default
Content
range value
0 to 2 1
0 to 2 1
0 to 2 1
0 to 2 1
0 to 2 1
0 to 2 1
0 to 2 1
0 to 2 1
0 to 2 1
0
CLOSE
OFF
OFF
ON
OFF
OK
Set Default
Content
range value
1 to 99 50