Sharp MX-FXX1 Service Manual page 62

Digital full color multifunctional system option facsimile expansion kit
Hide thumbs Also See for MX-FXX1:
Table of Contents

Advertisement

SW
Bit
Item
No.
No.
142
1-8
Not used
143
1-8
Not used
|
144
145
1-8
Not used
146
1-8
Not used
|
153
154
1
Addition of Content-X-
CIAJWNETFAX field
(in internet FAX send)
2
Nighttime FAX mode
setting <when Internet
FAX reception is not
set>
3
Pseudo-nighttime
mode setting <when
Internet FAX reception
is set>
4
Processing at times of
mail reception (when
the Content-X-
CIAJWNETFAX field is
not yet received)
5
Setting of reduced
printing when receiving
A3 by Internet FAX
6
Setting of reduced
printing when receiving
letters by Internet FAX
7
Setting of text printing
when receiving mails
without attached files
8
Resolution type of
internet FAX
SW selection and function
Setting to determine whether or not "CONtent-X-CIAJWNETFAX" is
added to the mail field in Internet FAX send. By adding this field,
printing of the mail text on the Internet FAX receiving side can be
inhibited (however, this function is only valid when the Internet FAX
receiving side supports this field).
"0": Do not add field
"1": Add IGNORE
Setting to determine whether or not to enter the minimum power
consumption mode when the panel power SW is turned OFF.
However, this function is only valid when Internet FAX reception is not
set.
"0": Enter the nighttime FAX mode
"1": Do not enter the nighttime FAX mode
Setting to determine whether or not to enter the minimum power
consumption mode when the panel power SW is turned OFF.
However, this function is only valid when Internet FAX reception is set.
"0": Enter the pseudo-nighttime FAX mode (do not enter the nighttime
mode)
"1": Do not enter the pseudo-nighttime FAX mode (enter the nighttime
mode)
Setting to determine whether or not to print the mail text in cases where
there is no "CONtent-X-CIAJWNETFAX" in the mail field when mail is
received by Internet FAX.
"0": Do not print mail letters
"1": Print the main text of mails
Exclude confirmed sent mails
Setting to determine whether or not to print reduced to 11 x 17 inch
sheet size when receiving A3 width documents when 11 x 17 inch size
sheet is set in Internet FAX reception.
"0": Reduce
"1": Do not reduce (discard)
When not reducing, the area that cannot be printed is scrapped.
Reduce the overall document to 94% when conducting reduced
printing.
Setting to determine whether or not to print reduced to A4 size sheet
when receiving 8.5 x 11 (letter) size documents when A4 size sheet is
set in Internet FAX reception.
"0": Reduce
"1": Do not reduce (discard)
Reduce the overall document to 94% when conducting reduced
printing.
Setting to determine whether or not to print mail texts when incoming
mails do not have attached files.
"0": Do not print mail letters
"1": Print the main text of mails
(Communication results error)
This sets the type of reading resolution when sending Internet FAX.
"0": inch type
"1": mm type
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 53
Initial value
1
0
0
0
0
0
0
0
0
1
0
1
0
1
1
0
1
0
0
Do not add
0
Enter the nighttime FAX
mode
0
Enter the pseudo-
nighttime mode
0
Do not print.
Internet FAX
reception
setting
1
Discard
Internet FAX
reception
setting
1
Discard
Internet FAX
reception
setting
0
Do not print.
0
inch type
System
settings

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents