Sharp MX-FXX1 Service Manual page 6

(5) Transmission function
Memory transmission
On-hook
Quick online transmission
Direct transmission
Automatically-reduced
transmission
Rotated transmission
Scaled transmission
Recall mode Error
Busy
Long original transmission
Confidential transmission (Sharp
mode)
Relay broadcast transmission
(Sharp mode)
Large capacity original mode
Scanning of thin paper
Mixed originals feeder
Default date sender transmission
(6) Reception function
Automatic reception
Manual reception
Memory reception
Fixed size reduced reception
Specified size scaled reception
Rotated reception
Setting of received data print
condition
2-sided reception
2-in-1 reception
Automatic reduction setting upon
receiving A3
Automatic reduction setting upon
receiving letter
Reception from a specific number
not allowed. (To be rejected)
External phone connection
remote
Confidential reception (Sharp
mode)
Received data bypass output
Index printing
Transfer function upon disabling
of output.
Internet Fax/Fax to e-mail
(Transfer of Internet Fax/Fax
reception data to e-mail, inbound
routing)
Exit tray setting
Insertion of job separator sheet
Staple function of received data
Auto wake up print
Received data print hold *1
FAX
94 destinations in all
Yes
Yes
Yes
(Switching: Memory transmission ↔
Direct transmission)
Yes
Yes
Yes
Enlargement/reduction is allowed
only from a fixed size to another.
Reduction may be done on the
receiver side with Fax/Internet Fax
sending.
Yes
Yes
Number/time to be set up through
system setup
Yes
Maximum of 800mm (single side
only/black-white 2 values only)
No
No
Yes
Yes
Yes (Random + MIX)
Yes (ON only)
FAX
Yes
No
Switching from manual reception to
automatic reception. (Allowed only
for SEF and Japan)
Yes
Yes
No
Yes
Equal size print (partition not
allowed)
Equal size print (partition allowed)
Equal or reduced size print
Condition setting through system
setting
No
Yes
Yes
Specified numbers only (50 numbers
/20 digits)
Yes
No
Yes
No
Yes (1 receiver (of transfer)
registration)
Yes
Yes
No
Yes
Yes
Yes
MX-FXX1 SPECIFICATIONS 2 – 3
Color toner print when black toner
runs out.
*1: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.)
Setting only on the reciver side.
(7) Report/list function
Image sending activity report
Transaction report
Address/phone number table
Group table
Program table
Memory box table (F code)
Communication original contents
print
List of rejected reception numbers
Table of control record for each
account
(8) Other Functions
Time specification
Polling reception
Bulletin board transmission
Cover sheet function
Transmission message
Sender print
Sender selection
Page number print
Date print
Polling protection function
Page partition transmission
Page connection
Confidential (receiver unit)
Relay broadcast instructions
Fax to e-mail (F code) *
Edge erase
Center erase
2 in 1
Card shot
Forward data transmission/
reception (Document Admin)
* This function means that e-mail address setteing on F code relay
broadcast allowed.
FAX
No
FAX
Yes
Time-specified output
Output with memory full
* Maximum of 200 times including
both transmission and reception
Yes
Yes
Yes
Yes
Yes
Always print/Upon error/no print
Yes
No
FAX
Yes
Yes
Yes
Up to 100 registrations allowed with
bulletin board, confidential and relay
broadcast all combined. (Free area :
1 registration)
Setting of the number of
transmission: 1/no limit.
No
No
Yes
Yes
Yes
Yes (Date can be expressed
alternatively)
Yes
Yes
No
Yes (F code method)
Yes (F code method)
Yes
Yes
Yes
Yes
Yes (Equivalent or enlargement up to
the paper width. The maximum
enlargement is not allowed to exceed
400%)
Yes
Data transmission by PC-Fax/PC-
Internet Fax is allowed, too.