Sharp MX-FXX1 Service Manual page 67

Report code
Display in the column of
(Communication
result
result)
51 PASS # NG
52 (No confidential function in
remote party)
53 (Confidential not received)
54 (Confidential BOX NO NG)
55 (No relay function in
remote party)
56 NO REL RX
57 (Relay ID unmatched)
58 REJECTED
59 RX NO F-CODE POLL
60 NO F-CODE POLL
61 RX POLL # NG
62 F POLL PASS # NG
63 NO F FUNC
64 NO F-CODE
67 F PASS # NG
68 BOX NO. NG
69 MEMORY OVER
70 (JOB MEMORY OVER)
71 NG71 XXXX *1
72 (NG72 XXXX) *1
73 NG73 XXXX *1
74 NG74 XXXX *1
75 NG75 XXXX *1
76 NG76 XXXX *1
77 NG77 XXXX *1
78 NG78 XXXX *1
79 NG79 XXXX *1
80 NG80 XXXX *1
81 NG REPORT
82 NO REPORT
83 NG LIMIT
84 REJECTED
Content of communication interruption
In poling sending, the allow number is not matched. <Bulletin board>
In polling sending, the system number is not matched. <Bulletin board>
In confidential sending, the remote party does not have confidential function. <Send>
(Including other company's machines)
1) The NSF signal has not "Confidential function" bit.
2) The NSF is not a Sharp machine.
1) In confidential sending, DCN is received for NSS. <Send>
1) In confidential reception, a confidential box number which is not registered is specified.
In relay command sending, the remote machine has no relay function. <Send>
(Including other company's machine)
1) The NSF signal has not "Confidential function" bit.
2) The NSF is not a Sharp machine.
1) In relay command sending, DCN is received for NSS. <Send>
2) In relay command reception, a remote station number which is not registered is specified. <Receive>
3) In F code relay broadcasting, an F code relay command is received.<Receive>
1) In relay command reception, the relay ID does not match. <Receive>
In reception, data are sent from a remote machine of receive inhibit number. <Receive>
(Not rejected in the bulletin board send or the F code bulletin board send.)
In F code polling (calling), the remote machine has no DIS bit 47 (polling function). <Polling>
In F code polling (calling), the called side has no send data. (DIS bit 9 is 0.)<Polling>
In F code polling (calling), DCN is received for SEP. <Polling>
In bulletin board, there is no send data for SEP. <Bulletin board>
In bulletin board, the sub address (bulletin board number (SEP)) is not matched. <Bulletin board>
In bulleting board, the pass code (PWD) is not matched. <Bulletin board>
In F code sending, the remote machine has no DIS bit 49 (sub address function). <Send>
(Check that the remote machine conforms to F code.)
In F code sending : <Send>
1) DCN is received for SUB. --- Check the box number.
2) DCN is received for SID. --- Check the box number and pass code.
In F code receiving : <Receive>
"F code relay broadcasting" or "F code confidential reception" is "Inhibited with soft SW."
In F code receiving, the pass code (SID) is not matched. <Receive>
In F code reception, a box number which is not registered is specified. (SUB is not matched.) <Receive>
Memory over in quick online sending <Send>
In PC-FAX reservation, the number of remote parties is exceeded. <Send>
In PC-FAX reservation, data sent from PC includes some errors. <Send>
In department management setting on the machine side:
• In reservation from PC-FAX or PC-Internet FAX, a department number which is not registered on the
machine side is specified. <Send>
• In reservation from PC-FAX or PC-Internet FAX, the department number is not specified. <Send>
In reservation from PC-FAX or PC-Internet FAX, the use quantity limit is exceeded. <Send>
When reserving specified filing in document filing in PC-FAX or PC-Internet FAX;
• The pass-code for the folder is set on the machine side and the pass-code from PC-XXX does not match
with it. <Send>
• The pass-code for the folder is set on the machine side and no pass-code is specified by PC-XXX. <Send>
• Reservation cannot be made due to machine busy. (Reservation of PC-FAX cannot be accepted.)
• When "PC-FAX or PC-internet FAX send inhibit" is set on the machine side.
Reserved with receive confirmation request in PC-Internet FAX, but the Internet FAX sender is not registered
on the machine side. <Send>
In reserving specified filing in PC-FAX or PC-Internet FAX, the machine has no filing function.
The filing function is inhibited on the machine side when filing specification is reserved by PC-FAX or PC-
Internet FAX.
An authentication error occurs when PC-FAX or PC-Internet FAX is reserved.
NIC connect failure (network abnormality)
• Check for disconnection of cables.
• A network trouble (CE-XX) occurs.
• The port is set to DISABLE.
• Authentication of the POP server is failed when POP before SMTP is enabled.
In Internet FAX send, reply of receive confirmation of the remote machine is not normal. (Including PC-Internet
FAX).
• Error of the disposition-modifier.
• The disposition modifier is not in an error, and the disposition type is other than displayed, dispatched, or
processed.
In Internet FAX send, time-out occurs in waiting for receive confirmation from the remote machine. (Including
PC-Internet FAX).
• In a case where send confirmation wait time-out time is other than 0, when send confirmation reply from an
Internet FAX destination is not received.
• Recalls of the set number of recalls are performed, but send confirmation reply from an internet AFX
destination is not received.
In E-mail/FTP, Internet FAX send, the send data size exceeds the upper limit of send data.
In e-mail receive, a sender is registered in receive reject address/domain. <Receive>
MXFXX1 TROUBLE CODE 6 – 3