Sharp MX-FXX1 Service Manual page 7

(9) Transmission Method
Mode
Transmission time
Modem speed
Intercommunication
Communication line
ECM
(10) Record Size
Mode
Maximum record width
Record size
(11) F code communication
Mode
Sub-address
Password
(12) Registration-related settings
Mode
One-touch/group *1
E-mail
FTP
Desktop
SMB
FAX
Program
Number of memory boxes
Number of sender registration
Number of sender selection
registration
Registration of polling approval
number
Registration of Fax system
number (Sharp mode)
Registration of Fax polling
approval ID number (Sharp
mode)
Fax relay ID registration (Sharp
mode)
Quick key (short cut registration)
*2
Import/export of address book
Black list (for SEF)
*1: Since scan/Internet Fax/Fax uses the common address book,
the number of addresses allowed for registration is the sum
total of all modes.
*2: Quick key is the function to select an address based on the
registered number of each address within the book for address
selection. Users should be able to select a quick key number.
FAX
2 seconds level (super G3/JBIG), 6
seconds level (G3 ECM)
Automatic fall-back : 33.6kbps →
2.4kbps
Super G3/G3
General membership telephone line
(PSTN), independent business line
(PBX), F net.
(R-key for PBX setting: SEGA/SEF)
Yes
FAX
293mm
A3 – A5/11 x 17 – 5.5 x 8.5
FAX
Yes (20 digits)
Yes (20 digits)
FAX
999 destinations
Use of LDAP allowed
Up to 500 registered addresses for
each group dial.
Registered name in 18 full-size
character (36 half-size characters)
One-touch dial receiver number
registration: within 64 digits for
receiver number + sub-address +
passcode (including "/").
Registration of addresses (groups),
settings (density, image quality) and
special functions in one set is
allowed. (48 of them)
Registration of bulletin board/
confidential/relay broadcast is
allowed up to 100.
Registration name: 18 characters
1 (default) with 20 characters
Total: 18 registrations (20 characters)
(Sender selection: In addition to
default, 18 registrations allowed)
10 numbers/20 digits
No
No
No
Yes (001 – 999)
Yes (By storage backup)
No
MX-FXX1 SPECIFICATIONS 2 – 4
(13) Telephone functions
Mode
On-hook function
Hold
Setting of pause time
Telephone transmission during
power outage
Tone pulse switching
(14) Sound settings
Mode
On-hook sound
Sound volume for calling
Line monitor sound
Reception sound
Transmission success sound
Transmission and reception error
sound
Sound setting for end of original
reading (image send)
*1: Large/middle/small. Setup by system setting.
*2: Large/middle/small/no sound. Setup by system setting.
*3: PATTERN 1/2/3/4. Setup by system setting. Different sound
should be selectable for each of reception/transmission
success/transmission and reception error.
*4: Setup by system setting. 5 steps of 2.0 – 4.0 seconds.
*5: Setup by system setting. 2-steps setting for every 0.3 or
0.7 second.
(15) Others
Mode
PC-FAX
FAST
Network FAST
Distinctive ring detection
FAX
Yes
No
Yes (1 – 15 seconds)
No (External telephone transmission
allowed)
10PPS, 20PPS, Tone, Auto (North
America/Taiwan)
* For the other destinations, set with
the soft switch.
Item FAX
Sound volume setting Yes *1
Sound volume setting Yes *2
Sound volume setting
Sound volume setting
Sound pattern Yes *3
Sound volume setting Yes *2
Sound pattern Yes *3
Time setting for Yes *4
communication ending
sound
Sound volume setting Yes *2
Sound pattern Yes *3
Time setting for Yes *5
communication ending
sound
Sound volume setting Yes *1
FAX
Yes
Yes (SEC only)
No
Setting for each destination