Sharp MX-FXX1 Service Manual page 20

66-7
Purpose : Data output/Check
Function (Purpose) : Used to output all image data saved in the
image memory. (Confidential data are also
outputted.)
Section : FAX
Item : Data (Image data)
Operation/Procedure
1) When [EXECUTE] button is pressed, it is highlighted and all
image data saved in the image memory are outputted.
* The confidential data are also outputted.
After completion of printing, the image data are not cleared.
* If there is no image memory, no print is made though [EXE-
CUTE] button is pressed.
2) After completion of printing, [EXECUTE] button returns to the
normal display.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] key is
pressed during printing, the operation is interrupted.
66-8
Purpose : Operation test/Check
Function (Purpose) : Used to send the selected sound mes-
sages to the line and the speaker. (Send
level: Max.)
Section : FAX
Item : Operation
Operation/Procedure
1) When the machine enters Simulation 66-08, the following
screen is displayed. (Default, left upper selected)
2) When the sound message button to be sent is selected, it is
highlighted and the previously set button returns to the normal
display.
* Only one sound message to be sent can be selected.
* When [EXECUTE] button is pressed, it is highlighted and a
sound message is sent.
* When [EXECUTE] button is pressed, it is returns to the nor-
mal display and sending a sound message is interrupted.
<Sound message table>
NONE (Mute) PAUSE (Pause
melody)
MESSAGE3 MESSAGE4
(Message 3) (Message 4)
ALARM (Alarm) RINGER
(Ringing sound
(Speaker))
SIMULATION NO.66-08
TEST
MESSAGE OUTPUT CHECK. (LEVEL MAX)
PAUSE
NONE
MESSAGE3 MESSAGE4
ALARM RINGER
MESSAGE1 MESSAGE2
(Message 1) (Message 2)
MESSAGE5 MESSAGE6
(Massage 5) (Message 6)
EXT.TEL.RING
ER (External
telephone call)
CLOSE
MESSAGE1 MESSAGE2
MESSAGE5 MESSAGE6
EXT.TEL.RINGER
EXECUTE
MX-FXX1 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 11
66-9
Purpose : Operation test/Check
Function (Purpose) : Used to send the selected sound message
to the line and the speaker. (Send level:
max.)
* For details of sound messages, refer to
the sound message table of SIM66-08.
Section : FAX
Item : Operation
Operation/Procedure
1) When the machine enters Simulation 66-09, the following
screen is displayed. (Default, left upper setting)
2) When a button of a sound message to be sent is selected, it is
highlighted and the previously set button returns to the normal
display.
* Only one sound message to be sent can be selected.
3) When [EXECUTE] button is pressed, it is highlighted and a
sound message is sent.
4) To end signal send:
When [EXECUTE] button is pressed, it is highlighted and sig-
nal send is interrupted.
SIMULATION NO.66-09
TEST
MESSAGE OUTPUT CHECK.(SOFT SW.)
NONE PAUSE
MESSAGE3 MESSAGE4
RINGER
ALARM
66-10
Purpose : Data clear
Function (Purpose) : Used to clear all image data saved in the
FAX image memory. (The confidential data
are also cleared.)
Section : FAX
Item : Clear (Image data)
Operation/Procedure
1) Press [EXECUTE] button.
[EXECUTE] button is highlighted and [YES] and [NO] buttons
become active.
2) Press [YES] button.
The image memory is cleared. [YES] button is highlighted.
* When [NO] button is pressed, [EXECUTE] button returns to
the normal display and [YES] and [NO] buttons gray out.
* During clearing the image memory, [EXECUTE] and [YES]
buttons are highlighted.
The image memory can be cleared even if there is no image
data.
3) After completion of clearing, press [CA] key to reboot the
machine.
CLOSE
MESSAGE1 MESSAGE2
MESSAGE5 MESSAGE6
EXT.TEL.RINGER
EXECUTE