Olivetti PR2 PLUS Service Manual page 68

Parameter
ISO SET
CHAR DEFINITION
CPI
COMPRESSED
VERTICAL RESOL.
LF + CR
LINE LENGTH
REPLY SYNCHRON.
STATUS REQUEST
OPTION HOR. MSRW
SAVE PARAMETERS
4-14
Values possible
OLI-UNIX
ISO 8859/1
ISO 8859/2
ISO 8859/5
ISO 8859/6
ISO 8859/7
ISO 8859/8
ISO 8859/9
ISO 8859/15
LQ
DRAFT *
OCR-A
OCR-B
5
10 *
12
15
16,6
17,1
17,1
16.6 *
1/240 inch *
1/216 inch
N *
Y
90 *
94
N *
Y
NO WAIT *
WAIT
This is a warning message related to the Horizontal Magnetic option. Refer to
section "If the horizontal magnetic option is present" on page 4 - 16
NO
YES *
Service Manual
Description
If the character generator selected has been IBM
CHAR SET --> ISO
Selection of print definition.
Selection of printing pitch..
Defines the spacing selected with ESC >
Selection of vertical resolution.
Activate (Y) or disactivate (N) automatic execution of a
carriage return (CR) every time a line feed command
(STATION1) is received.
Selection of the maximum width of the print line,
expressed in number of characters at 10 cpi.
Management of the DSR in transmission.
This parameter determines the timing of the status
reply to an ESC j command. Selecting NO WAIT,
the reply will be provided as soon as possible and in
parallel with printing or paper movements. Selecting
WAIT, the status reply will be provided at the end of
printing.
Saves (Y) or cancels (N) the values configured in this
area of the programming menu.
XZAC4219-05