Paper Feed Motor Disassembly/Reassembly - Olivetti PR2 PLUS Service Manual

Paper feed motor disassembly/reassembly

1. Disassembling the casing. See the section
2. Remove the mechanical assy as explained above. See the section
on page 7 - 6.
3. Loosen the two lock nuts (1) of the motor and remove the document drive belt (2) from the pulleys.
4. Loosen the nuts (1) and extract the motor.
2
Figure 7 - 14 Disassembling the paper feed motor
NOTE: during reassembly, adjust the document drive belt. See the section
belt" on page 6 -
7-12
"Casing disassembly/reassembly" on page 7 -
1
3.
Service Manual
4.
"Mechanical assy disassembly/reassembly"
"Adjusting the document drive
XZAC4219-05