Magnetic Option Cards; Horizontal Magnetic Unit - Olivetti PR2 PLUS Service Manual

MAGNETIC OPTION CARDS

Horizontal Magnetic and MICR interface cards for managing the optional magnetic units can be connected to the
motherboard:
• Horizontal magnetic unit - interface card code XYAB3124 - to connect to the special connectors on the
motherboard;
• MICR unit - interface card code XYAB1564 - to connect to the special connectors on the motherboard.

Horizontal magnetic unit

This device can read/write horizontal magnetic stripes. It consists of a mobile magnetic printhead that operates
across the insertion slot with a specific controlled-movement mechanism.
It operates across the entire insertion slot of the printer and does not involve any particular constraints as regards
positioning of the passbook inserted.
The operation on the stripe is carried out exerting controlled pressure on the passbook to guarantee uniform
distance between the printhead and the magnetic support.
– R/W reference standards: DIN ISO 32744, IBM 3604, ANSI;
– alignment: autoborder;
– error rate: <1/10000 (after three automatic retries).
The following figure provides an illustration of the interface card that is connected to the special connectors on the
motherboard.
Figure 1 - 9 Layout of optional Horizontal Magnetic interface card indicating the locations of the connectors
Connector for power and motor signals from
1
the motherboard
2 Connector for signals from the motherboard
3 Connector for magnetic head
1-14
1
4 5
4
5
Service Manual
2
3
Connector for photosensor for resetting transport
motor of magnetic head
Connector for magnetic head transport motor
XZAC4219-05