Description Of Configuration Parameters - Olivetti PR2 PLUS Service Manual

Description of configuration parameters

In this section the configuration parameters present in the programming menu are listed, with the various values
that can be set and their meanings. Values set by default are indicated in bold and highlighted with an asterisk.
Configuration mode menu "MENU: CONFIG." parameters
Parameter
DRAFT SPEED
LQ TYPE
PAPER WIDTH
BUZZER
INTERFACE
SCAN F_BRIGHT
SCAN R_BRIGHT
PAP. EDGE DETEC.
4-6
Values possible
NORMAL *
HIGH
VERY HIGH
LQ2
NL Q1 *
NL Q2
FIRST LINE *
PROGRAMMABLE
NO
YES *
USB
SERIAL1
PARALLEL
COM1-USB
USB - PAR
DUAL-PAR
From - 60 % to + 60 %
with step from 10 % -
default + 0%
From - 60 % to + 60 %
with step from 10 % -
default + 0%
N
Y
Service Manual
Description
Normal printing speed 370 cps
High printing speed 510 cps
Very high printing speed 560 cps
Letter Quality 125 cps
Near Letter Quality type 1 185 cps
Near Letter Quality type 1 185 cps
The width of the document is measured on the first line
printed
The position used for measuring the width of the
document can be programmed
Switches the buzzer on
Switches the buzzer off
System connection interface. Depending on the
interface selected, the related parameters indicated in
the tables below can be configured. See
See page 4-8
See page 4-8
See page 4-9
See page 4-9
See page 4-9
page 4-7
XZAC4219-05