Olivetti PR2 PLUS Service Manual page 100

Fault
X
X
X
X
5-16
Possible cause
Paper fragments left in the printer
Problems on interface
connections
Line problems on the interface
Incorrect set-up
Service Manual
Solution
Perform cleaning of the printer. See the
section "Cleaning the paper paths" on
page 6 - 1
Replace the motherboard. See the section
"Disassembling/reassembling the
motherboard (printers with scanner)" on
page 7 - 21 or "Disassembling/
reassembling the motherboard (printers
with serial number 8.xxx.xxx and
1.xxx.xxx)" on page 7 - 23
Replace the motherboard. See the section
"Disassembling/reassembling the
motherboard (printers with scanner)" on
page 7 - 21 or "Disassembling/
reassembling the motherboard (printers
with serial number 8.xxx.xxx and
1.xxx.xxx)" on page 7 - 23
Check the settings of the operation
parameters. See the section
"CONFIGURING THE OPERATION
PARAMETERS" on page 4 - 1
XZAC4219-05