Ejection of documents
According to the application program, documents may be ejected as follows:
•
Returning these to where they were introduced manually (feed slot).
The documents ejected from the front feed slot:
– If less than 100 mm in length, are abandoned by the drive rollers
– If they are 100 mm or more long, they remain grasped by the last pair of rollers so that sheet does not slip off
the front resting surface.
•
From the rear slot of the machine, starting from the front feed slot.
NOTE: if the document processed is not output by the printer, consult the section, refer to section
JAM" on page 3 -
XZAC4219-05
11.
Sercice Manual
"PAPER
3-7