Olivetti PR2 PLUS Service Manual page 66

Parameter
TOF IBM-PP LIKE
PNS SELECTION
PNS # 4192
PNS # 4501
SAVE PARAMETERS
"OLIVETTI" menu parameters
Parameter
EMULATION
LINE BUFFER PR40 LIKE
TOP MARGIN PR40 LIKE
PASSBOOK
BINDING
4-12
Values possible
Y *
N
N *
Y
N *
Y
N *
Y
N
Y *
Values possible
PR2 / PR2E
PR40
PNS2845
N
Y *
N
Y *
N
Y *
VERTICAL
HORIZONTAL
Service Manual
Description
Selects the type of top margin of the page (TOF) for
the document managed.
N - The value of the top margin will be between
4.23 mm (defined through calibration) for documents
and 7.4 mm for passbooks.
Y - The value of the top margin will be 4.3 mm for
documents and 7.4 for passbooks.
Selecting (Y) permits access to the selection menu of
the PNS in the IBM environment.
If enabled, on reception of a Form Feed, ejection is
performed regardless of the form length selected.
Selects spacing of 1/5".
Saves (Y) or cancels (N) the values configured in this
area of the programming menu.
Description
Selection of OLIVETTI emulation
If PR40 emulation is selected, selecting (Y), the
length of the receiving buffer is set as PR40 (1 Kb)
or 8 Kb.
If PR40 emulation is selected, selecting (Y), TOF
is managed by a fixed mechanical head (PR 40).
Selecting (N), TOF can be adjusted.
If PR2 / PR2E emulation is selected, indicates if the
printer is enabled or not for handling passbooks.
Depends on the "PASSBOOK: Y" item. Selects the
type of binding of the passbook (horizontal or vertical).
If horizontal binding is selected, during printing on the
passbook, the head will exit from the passbook close
to the binding, in order to improve feeding of the
passbook.
XZAC4219-05