PAPER JAM
The paper may jam along the path inside the machine. Jamming may be caused by:
•
Paper path obstructed (scraps of paper, for example)
•
Paper fed crosswise
•
Weight or format outside permitted limits
•
Paper in bad conditions: creased, misshapen or in poor condition
•
Paper with metal staples or paper clips (this condition may seriously damage the machine)
•
Multicopy forms with incorrectly glued sheets
•
Continuous form not correctly tightened on the tractor-feeder.
Possible areas of jamming:
•
A area: initial feed area from front feeder
•
B area: internal area of the printer
•
C area: rear area towards the documents outfeed.
Figure 3 - 14 Possible areas where the paper could get jammed
If a paper jam occurs in any area: switch off the printer and remove the paper following the illustrated procedure
below.
XZAC4219-05
Sercice Manual
3-11