Consumable Life Reminder; Unit Change; Option Settings - Olivetti d-Color MF201 Service Manual

Field Service Ver. 1.0 Jun. 2008
Mode
884
State
Bit
0 Fan control for the low-temperature warm-up
*: In order to make this setting valid, main
power switch needs to be turned off and on
twice.
10.5.11

Consumable Life Reminder

Functions • To select whether or not to give the display of PM parts lifetime
PM parts lifetime display: An entire screen warning is given when the service life
• Applicable units:
Transfer belt unit, fusing unit, imaging unit (C, M, Y, K)
Use • Use to select not to give the display of PM parts lifetime.
Setting/ • The default setting is "Yes."
Procedure
10.5.12

Unit Change

Functions • To select who is to replace a unit.
• When the unit life arrives, the warning display is intended for the specific person who
is going to replace the unit.
When "User" is selected
When "Service" is selected: Life warning.
Use • Upon setup
Setting/ <Unit Change>
Procedure • The following are the default settings:
Toner Cartridge
Imaging Unit
Waste Toner Box
10.5.13

Option Settings

Functions • To set the status for the optional stamp unit SP-503.
Use • To be used for setting up the stamp unit SP-503.
Setting/ • The default setting is "No."
Procedure
Y109660-1
Default value
Bit 7654 3210
0000 0001
Setting item
of a specific unit has been reached, prompting the
user to replace the part.
"Yes"
: Printing is inhibited.
US, Japan, Others 2
: "User" Service
: User
: User
Yes
Sevice Manual
HEX: 01
Setting value
0 1
Valid Invalid
No
Europe, Others1,3,4
"User" Service
"Service" "User" Service
"Service" "User" Service
"No"
10. Service Mode
Description
Sets the valid/invalid of
the fan control function
which further prevents the
waviness of the paper
when printing immediately
after the warm-up in low
temperature.
251