Disassembly/Reassembly Procedures; Overview; Removing The Case - Olivetti PR4 SLIP Service Manual

5. DISASSEMBLY/REASSEMBLY PROCEDURES

5.1 OVERVIEW

This chapter is divided into two parts which describe
how to disassemble/reassemble the parts and how to
make the related adjustments.
Before proceeding with any operation, power off the
printer and unplug it from the electrical outlet.
XYAA6338

5.2 REMOVING THE CASE

• Open the front and rear covers by rotating them
completely around their respective hinges .
• Remove the ribbon cartridge.
• Extract the console by gently pushing it upwards.
• Manually remove the Closed cover detection
microswitches.
RIBBON CARTRIDGE
Fig. 5-1
Service Manual
CLOSED COVER DETECTION
MICROSWITCHES
CONSOLE
5-1